Redwood Viscometer Manufacturer | Kinematic Viscometer Bath Exporters

We offer a wide range of oil testing instruments & petroleum testing instruments, which are used for performing temperature controlling activities at different conditions. These are available in different technical specifications and can be customize to meet the specific requirement of our clients.

Redwood Viscometers

These viscometers are designed for viscosity tests of petroleum Products. They confirm to requirements of IP 70 (Former). Two adaption of Red Wood viscometer are available No. 1 for liquids having Red Wood flow 20 seconds to 2000 seconds and No. II for liquids whose flow time exceeds 2000 seconds. The complete outfit comprises Stainless Steel bath with electrical heating arragment suitable to operate at 220 volts AC Mains with tap, silver plated oil cup with precision stainless steel jet, cup cover, ball valve, thermometer-clip. Stirrer and M.S. Sheet stand with leveling screws.

Electrically Heated with Energy Regulator Control.
Gas Heated (with Gas Burner)
Electrically Heated with Voltage varrier (Copper Coil)
With Electronic Digital Indicator and Controller & FHP Motor Stirrer

Pensky Marten Flash Point Apparatus

This apparatus is made as per IP 34, ASTMD-93 and IS 1448 (Part I) 1270 (P.21) and IS 1209-1953 method B. Used for finding out Flash Point above 70^oc and below 300^oc. The instrument having Oil Test Jet/Gas Test Jet Flame Device, stirrer with flexible shaft. The assembly rests in Air Bath which is covered with Dome shape metal top. The cup is fitted with insulated Handle and locking arrangement near Cup flange. The assemble is kept on round shape electric heater with Separate temp. regulator. Suitable for operation on 220 volts 50 cycles AC Circuits.

P.M Flash Point App. Elect. Heated with Energy Regulator Oil Test Jet.
Same as above -Elect. Heated With Concealed Hot Plate & Oil Test Jet.
P.M. Flash Point App. Elect. With energy Regulator, Geared Motor Stirrer (120 R.P.M.) Oil Test Jet
P.M. Flash Point App. With Voltage variac Control Oil Test Jet.
Same as above --- Voltage Variac with Geared Elect. Motor Stirrer (120 R.P.M.) Oil Test Jet
Pensky Martens Flash Point App. With voltage

Distillation Apparatus
( As per IP 123, 191 and IS 1448 P : 18 Specification)

This apparatus is used for determinations of distillation characteristic of petroleum products. The instrument consists of metal shield to support distillation flask with GEARED HEIGH ADJUSTABLE DEVICE. It has a slot for vapour tube. A glass window is provided in front side for clear view of inside objects. It also has cooling bath or condenser with M.S. black painted stand. Electrically heated. The instrument is supplied with two square asbestos boards with 50 mm and 70 mm holes (without glass wares)

Single Distillation Apparatus electrically heated with energy Regulator with gear device.
Single Distillation Apparatus with Voltage Varrier (Copper Coil) with gear device.
Twin (Duplex) Distillation Apparatus elect. Heated model with two energy Regulators with gear device.
Twin (Duplex) Distillation Apparatus with two voltage varriers (Copper Coil) with gear device.
Distillation Apparatus for crude petroleum as per IP-24 with one glass condenser elect. With energy regulator control.

Bomb Calorimeter Apparatus
(IP-12 Specifications)

It is used for determination of heat of combustion, calorific value and sulpher contents of solid and liquid fuels. The bomb body and lid are machined from corrosion resisting Stainless Steel rod Its capacity is appox. 300 ml. It is provided with high pressure valve and electrodes. The Calorimeter vessel, water jacket, Stirrer FHP motor driven are provided as per IP Standards. The bomb calorimeter is supplied with firing unit, with Electronic Digital thermometer, Pellet Press, ignition wire, and pressure gauge on stand with copper pipe fitting.

Bomb Calorimeter Apparatus with Digital Thermometer 0.1^oc Read Out
Bomb Calorimeter Apparatus Digital Thermometer with 0.01^oc Read Out with Remote Control Unit
Spare Bomb 300 ml. cap.
Spare Neoprene washer for bomb
Spare Stainless Steel Crucible

Flow Cups

Flow cups mode from brass having S.S. orifice for measuring viscosity with stand.
Available different standard IS 3944, IS 101, DIN 53211, ASTMD 1200.

Flow Cup B4 with Stand.
Flow Cup B4 with Calibration Certificate.
Flow Cup B4 with Govt. Calibration Certificate.
Cups B-2, B-3, B-4, B-6, B-8
Digital Stop Watch Multi Functional (1/100 Sec.)

Kinematic Viscometer Bath
(IP-71 and IS 1448 (P-25) 1976)

This viscometer bath is used to maintain the correct constant Temperature for estimating kinemetic Viscosity of Oils & Petroleum product. In this type of bath Various Viscometer may be fixed as an internal part of bath. The bath is rectangular in shape. Inside tank made of Stainless Steel sheet. On two sides toughned glass provided by an electronic relay and Digital Contraller Temperature range 5oc above room temperature to 100oc. Accuracy ± 0.1o c stirring is done by a F.H.P. elect. Motor stirrer. It is supplied with viscometer tube holders and S.S. cover.

Kinematic Viscometer Bath of chamber Size 12" x 9" x 12" deep for 4 Viscometer with Digital Temp. Indicator & Controller
Kinematic Viscometer Bath Chamber Size 12" x 12" x 12" deep for 6 Viscometer with Digital Temp. Indicator & Controller
Kinematic Viscometer Bath with REFRIGERATION SYSTEM. Temp Range 0^o to 100^oc
Kinematic Viscometer to accommodate 3 Glass Viscometer Tubes with round glass Vessel. Digital Temp. Controller with Indicator.
Suitable up to 120^oc Temp. accuracy ± 0.1^oc.

Penetrometer

For determine semi solid to solid materials, such as grease, waxes, cosmetics. Using penetration in the sample by a cone of definite weights (50 or 100 gms.) fitted to rod. By adjusting arm to touch the surface of the sample, automatic timer is also available.

Spare: Cone, Needle, Weights and Containers.
Complies with: ASTMD 937, ASTMD 217, IS 1448, IP 50

Oil and Petroleum Instruments