Medical Equipments

Specification
Frame work of strong & precise steel tubes mounted on 10 cms dia Swiveling castors. Having four section top of perforated CRCA sheet duly machine press bent. Backrest and knee -rest sections manoeuvred by two separate screws. Tabular head and foot bows of unequal height with vertical tube supports. Provisions for foer salinelocations

Overall Size : 206L x 90W x 60 H cms
Finish : Epoxy Powder Coated

Made of tubular steel having angle iron frame with MS sheet top One side flap is adjustable Up & down. Having device to hold the saline rod but with special gyane device and being supplied With lithotomy poles and straps

Size : L 72" W 20" H 32"

Steel frame work with adjustable backrest upper section with three drawers. Lower section with Lockable Sliding door tray for B.P. apparatus spring or knob based Mechanism for raising or lowerling the backrest.

Specifications
Six section S.S. sheet top /or translucent acrylic sheet top with detachable leg section for gynae, urology and endoscopy and all other general procedures. Improved gear mechanism for all positions. Improved hydraulic pump ( DOUBLE CYLINDER) conceled in a rectangular chamber covered with stainless steel sheet with single action hydraulic lift. Heavy mild steel base covered with stainless steel sheet with fibre wheels provides stability to the entire table and has toe space and foot rails for surgeion's.Auto floor locking device. The detachable leg section provides easy lithotomy positioning.the improvide hydraulic system providessmooth movement and the speed of lowering the table is permanently set/ or adjustable type.the and having device to locking in a set position

Supplied with all standard accessories

• A very fine gear mechanism for smooth function for the table with zero wobbling.
• Supplied with complete standard accessories as per enclosed catalogue.
• Suitable for all positions like chair position, reverse trendlenburg and trendlenburg Positions, lateral position, flex and reflex position etc. The table is mounted on centrically / or eccentrically positioned table top( depend on choice) etc.
  • Mattress set 50 mm./or 5 inch. Thickness- 1 set.
  • And as per given in enclosed catalogue.

Specification

• Two Gases Rotameter Oxygen & Nitrous-Oxide
• Oxygen Flowmeter range 100 cc/min. to 10 liters/min., Nitrous Oxide Flowmeter Range 200cc /min. to 12 liters/min.
• Standard Fresh Gas Outlet.
• Change Over System Open Circuit to Close Circuit.
• Emergency Flush Valve at front Panel connected to incoming O2 supply
• Goldman type Halothane Vaporizer.
• Parking space for two additional Vaporizers.
• Non-return cum Pressure Relief Valve minimize risk Of back flow of gases.
• Blows off valve when pressure exceeds 200cm of Water column fitted.
• Provision to fit Ventilator.
• Provision to fit Carbon Dioxide Absorber.
• Extended platform at rear for two 'B' type cylinders.
• Table top made of Stainless Steel.
• Top Tray provided at eye level for keeping Monitoring Equipments.
• Maggill's or Bains circuit.
• One spacious Drawer on smooth runner.
• Four Castor Trolley with front two lockable Wheels.
• Pin Index Yokes two for Oxygen and two for Nitrous Oxide.
• High-efficiency Regulators for reliability two each for O2 & N2O.

Safety Features

• N2O cut off in case failure of Oxygen supply.
• Low Pressure Oxygen Audible Alarm.

NOTE : Cylinders, Circle Absorber, & other items than the above mentioned specifications are supplied at extra cost

Item specification

• Standard 12-lead measure, 3-lead print, 1-lead display on the screen.
• Input resistance: 2.5M
• Record resolution: Y axis 8 points/mm, X axis16 points/mm(speed of paper 25mm/s) Z>8 points/mm( speed of paper 50mm/s)
• Record paper: 48mm*15m
• Recording sensitivity
• standard sensitivity 10mm/mV, allowance inaccuracies ±5% Sensitivity shift amplifier has1/4 (2.5mm/Mv), 1/2 (5mm/mV), 1(10mm/mV), 2(20mm/mV) sensitive shift when printing. The allowance inaccuracies range from 1 shift to other shift is±5%
• Time constant: >3.2s
• Temperature drift: between 5°C~40°C and the baseline drift average is not more than 0.5mm/°C
• Disturbance between channels: under standard sensitivity, each channel's interdisturbance should be more than 0.5mm
• Auto lead mode and manual lead mode
• Lead-off Detection with display indicator LCD display with English interface, signs and numbers.
• Common Mode Rejection Ratio: >60dB Device storage and transportation condition
• Environment temperature range -20°C+55°C Relative humidity range <93%
• Atmosphere pressure range 500 hPa~1060hPa Equipment operation environment condition Environment temperature range +10°C+40°C Relative humidity range 30%~75%
• Atmosphere pressure range 700 hPa~1060hPa Bandwidth For 10 Hz sine's ImV signal, the signal amplifier's input range should be 100%, 0.5Hz~100Hz should be between 70%~105%.

Model : Table Top Pulse Oximeter LPM-103 is ideal for bed-side monitoring with excellent Price/Performance ratio.)

Manufactured/Imported By: International Trading Corporation
(An ISO 9001:2000 Company Tuv Certified)

Specifications :

• LCD Based Pulse Oxymeter.
• Table Top Model.
• Response Mode: Adult, Pediatric & Neonate.
• Continuous Plethysmograph Display & Bar Graph.
• Pulse Rate: 20 250 BPM.
• Alarm Setting for SPO2 & Pulse Rate High & Low.
• Displayed Trends 24 Hr - Spo2% Pulse Rate & Status.
• Real Time & Date Display.
• Alarm Visual & Audio.
• Screen Size 110 mm x 85 mm & More.
• Battery Backup 3 Hours.
• Set up Menu: Predefined Parameter Selection.
• " A.C. Mains Variation : 100-260 V AC
• " Power Consumption : <20 VA.
• " Ratient Safety: Class 1 BF - ISO Standard.

Monitor
Compact and portable, allowing for uninterrupted monitoring with built-in battery high bright LEDS display of NIBP,SPO2 and pulse rate high resolution color LCD for trend tabular and SPO2 waveforms display manual/auto/continuous measurement of NIBP adjustable audible and visual alarms Up to 600 groups NIBP data up to 10 hours suitable for adult, pediatric and neonatal patient

Display
7 segment LEDS for systolic,diastolic,mean pressures,SPO2 and pulse rate. 2.4``color LCD for waveforms,bargraphic,trend and system menu

NIBP

• Method:Oscillometry
• Operation modes: Manual/Automatic/STAT auto Measure time :5~250 minutes adjustable, interval 5 minutes
• Measurement range:10~270mmHg
• Overpressure protection: yes
• Resolution:1mmHg
• Alarm:systolic,Diastolic,Mean

SPO2

• Measurement range:0~100%
• Resolution:1%
• Accuracy:70~100% ¡À2%,0~69% unspecified
• Alarm range:0~100%

Pulse Rate

• Range:0~254bpm
• Resolution:1bpm
• Accuracy: ¡À1bpm

Option

• ECG,Thermal printer
• Dimension:200*230*75mm
• Weight:about 3.5kg
• Power Supply: AC 100~250V 50/60Hz